The ST-18P LED tiles offer the designers an endless array of possibilities when it comes to creating a video surface that have never been possible before with conventional products. A clever system makes it possible achieve positive and negative angles ranging for 0 to 15 degrees between each tile, and the quick and safe rigging allows heights of up to 20 modules.

The over-sized power supply guarantees optimal brightness through the whole lifetime of the LEDs. All the electronics are stored in a single, easy-access enclosure, which makes servicing and maintenance an easy task.

​

PRODUCT DETAILS

​

Display specifications
* Pixel pitch : 18mm
* Brightness : 4,800 Nit at 50% brightness of full white
* LED configuration : 3-in-1 SMD (5050)
* Viewing angle : Vertical: over 100 degree, Horizontal: over 145 degree
* Transparency : 35% including PSU
* Lifetime : 50,000 hours at full white, half brightness
* Colors : 180 trillions
* Refresh rate : Variable, less than 800 Hz, flicker-free
* Color processing : 16 bit

Electronics
* Power consumption : 300W max per module / 100W average in normal use
* Voltage input : 90 to 260 VAC, 50-60Hz auto switching
* LED drive : Constant voltage, current-driven
* Cooling : Passive (no fans)
* Connections (power) : 20A Powercon in and out
* Connections (signal) : Ethercon (RJ45) in and out

Hardware
* Rigging : Vertical click 'n rig system, horizontal fast fit side locking system
* Rigging rating : 10:1 for 18 modules high, TÜV approved
* Outdoor protection rating : IP65 IEC / EN60529 (weatherproof)
* Front finish : Anti-reflective black plastic panel
* Curve : Ranging from 0 to 15 degrees, positive or negative
* Size : 576mm x 576mm x 85mm (22.7" x 22.7" x 3.4")
* Weight : 9,5 kg per module (21 lbs)